5.1.1 EARTH LEAKAGE DEVICES

All electrical power outlets used on projects must be fitted with an approved "current operated core balance earth leakage system circuit protection unit".

5.1.2 ELECTRICAL EXTENSION CORDS

Only approved types of electrical extension cords no longer than 30 meters shall be used; they shall be properly tested and tagged by a licensed electrical trades person. Damaged or inoperable cords are to be immediately repaired or replaced. Plug ends must be transparent or of moulded plastic type.
Do not have electrical extension cords coiled when in use.

5.1.3 LIVE ELECTRIC CABLES

All practical steps shall be taken to prevent the danger of live electric cables or apparatus coming into contact with employees, either by rendering the cables or apparatus electrically dead, or safely insulating them.

5.2 TOOLS

ALWAYS use the correct tool for the job.
ALWAYS use tools that are in good condition.
ALWAYS report defective equipment to your job Supervisor immediately.
ALWAYS keep guards in place.
DO NOT use electrical leads or cords which are frayed, damaged or the insulation cut, or do not have a current inspection tag attached.
DO NOT pull electrical leads or cords over sharp edges.
DO NOT run electrical leads or cords through oil or water.
DO NOT use electrical equipment if your hands are wet or if standing on wet ground.